Volcano UniTool v1.5.9 Inferno Tool Latest Setup Download

Volcano Box Inferno Tool Full Latest Setup Free Download

Inferno Tool UniTool V1.5.9 The Volcano box Volcano Box Inferno Tool latest software download
Inferno Tool MTK V1.5.4 Inferno Tool SPD V1.2.3 smartphones also use to flash the Volcano Box Inferno android as well as non android mobile inferno dongle setup download inferno unitool setup inferno dongle supported models inferno dongle price in india volcano inferno inferno dongle features inferno support inferno dongle activation DOWNLOAD LATEST SETUP

Links Given Below to Download the Volcano Box Inferno Tool Latest Setup

There are four types of software module available only For Inferno Activated VolcanoBox And Inferno Dongle Right Now, you can download your desired Volcano Box Inferno Tool Latest Setup Direct from the high speed server without any problem . inferno dongle setup Do not forget to share more and more .

Volcano Box Inferno Tool Latest Setup Download

Inferno Tool MTK V1.5.4       Download
Inferno Tool UniTool V1.5.9   Download
Inferno Tool SPD V1.2.4       Download
Volcano Box Utility v3.0.9      Download

Requirements to use Volcano Box Inferno Tool :-

  1. A computer or laptop to run this box – You can run this box on Windows XP, Windows 7, Windows 8, Windows 8.1, or Windows 10. Volcano Box inferno dongle setup
  2. USB cable – To run this box first connect your box to the computer using a USB cable.
  3. USB Drivers – You need to download the latest version of the Volcano box before running it and the USB driver too. You install Volcano box USB driver in your computer .

Note – Some countries have banned the repair or change of the IMEI number, Do this at your own risk, If anything happened we are not responsible for that .

Here, we provide this software for all countries.  You can download Volcano Box Inferno Tool latest software from here according to the law of your country.

Want to Know More About Volcano Box Inferno Tool latest software
  1. Volcano box setup –  This is the main software for computer, Volcano box.With this software you can flash some old type mobile phones. Volcano Box inferno dongle setup
  2. inferno MTK module – With this software you can flash and repair the phone is new and old MTK CPU BASED or you can also remove those pin lock or pattern lock.
  3. inferno SPD module – Through this software you can flash the old, or limited mobile phone that has the Spreadtrum IC.
  4. inferno UniTool module – Through this software you can unlock, flash and repair patterns of phone with Qualcomm CPU.

What’s new Added in Volcano Box Inferno Unitool 1.5.9 ?

VolcanoBox Inferno Tool UniTool 1.5.9 inferno dongle setup

World’s Unique Solution for Huawei Modems
Special Gift for Zong & Telenor & Mobilink
Clouds & Wingle Users

What’s new ?  DOWNLOAD HERE

Added backup GPT info files
Added Automatically copy of updated GPT file when backup factory file
Added Option for User to select Rewrite GPT when write factory file
Added Option for User to select Update GPT when write factory file
Added reboot into edl
Added reboot into recovery
Added reboot into bootloader
Added some user full logs which helps to repair phones
Added Word’s 1st Huawei Modems Unlocking Solution (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Huawei Modem Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Zong Huawei Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Zong Huawei Wingle Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Zong Huawei Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Zong Huawei Cloud Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Telenor Huawei Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Telenor Huawei Wingle Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Telenor Huawei Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added World’s 1st Telenor Huawei Cloud Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Mobilink Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Telenor Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Zong Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Mobilink Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Telenor Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
Added Zong Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)

Complete Details of each ver & steps you have to do while unlock

Model: E5330s-B2
Supported Ver: 21.210.21.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.21.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5330s-B2
Supported Ver: 21.210.25.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.13.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Volcano Box Inferno Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E8231-S1
Supported Ver: 22.618.17.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
Model: E5573cs-609
Supported Ver: 21.318.xx.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.
Model: E5573cs-609
Supported Ver: 21.323.00.00.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.01.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.02.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.03.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.
Model: E8372H-608
Supported Ver: 21.316.01.04.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”
Model: E5573cs-322
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”
Model: E5573cs-322
Supported Ver: 21.323.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”
Model: E8372h-153
Supported Ver: 21.313.xx.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.
Model: E8372h-153
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”
Model: E8372h-153
Supported Ver: 21.321.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”
Model: E5573s-320
Supported Ver: 21.315.01.00.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.
Model: E5573s-320
Supported Ver: 21.315.01.01.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.
Detailed Tutorial How to Unlock
Plug locked device into Pc Usb
Run device temporary Drive auto run setup ( if not installed before )
Run Dc Unlocker in Admin Mode and Click on “Detect Modem”
Install “FcSerialDrv” Drivers
From Dc unlock Click on “Detect Modem” again

you will get information like this

Found Applications port COM58
Found modem : E8372
Model : Huawei E8372h
IMEI : 866280026583188
Serial NR. : R7EDU17327005367
Firmware : 21.316.01.04.274
Dashboard version : WEBUI_17.100.15.10.274_RE5
Web UI version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

now READ “FRIMWARE VER” VERY CARE FULLY & DO AS I DESCRIBE FOR EACH MODEM & FIRMWRE VER. FOR THIS TUTORIAL I HAVE “21.316.01.04.274” SO I WILL DO AS PER THIS FIRMWARE.
Disconnect Device from Usb & Attach TestPoint & Connect with PC Usb
go to device manager and make sure there is only ONE COM PORT ” Huawei Mobile Connect – 3G Pc Ui Interface Volcano Box Inferno (Com port Number)
Open Inferno UniTool
Go to Huawei
Huawei Modem
Erase
Select Correct Model ( Select CAREFULLY, See Model Number from Device Sticker)
Select Firmware ver ( See your Current Ver from Dc Unlocker )
Write Correct Com Port In Inferno Software( See in Device Manager which port is used by “Huawei Mobile Connect – 3G Pc Ui Interface” )
Click on Next
it will show like this

>>Current Task: HUAWEI>>Huawei Modem>>Erase
>>
>>Model: E8372H-608
>>Firmware Ver: 21.316.01.04.274
>>COMPort: 59
>>
Modem Files prepare Finished.
Erase Successfully!
Now See Device Manager there should be “2” Device in com ports tab
“Fc – Application Interface (Comport Number)”
“Fc – Pc UI Interface (Comport Number)”
Open INferno Unitool
go to huawei
Huawei Modem
Patch Flash
Select Correct Model ( Select CAREFULLY, See Model Number from Device Sticker)
Select Firmware ver ( Select Ver which you Select for Erase )
Write Correct Com Port ( See in Device Manager which port is used by “Fc – Pc UI Interface (Comport Number)” )
Click on Next
it will show you like this

>>Current Task: HUAWEI>>Huawei Modem>>Patch Flash>>Volcano Box Inferno
>>
>>Model: E8372H-608
>>Firmware Ver: 21.316.01.04.274
>>COMPort: 58
>>
Modem Files prepare Finished.
Patch Flash Successfully!
unplug Device & Connect it Again
open Dc unlock and click no “Detect Modem”

it will show you like this

Found modem : E8372
Model : Huawei E8372h
IMEI : 000000000000000
Serial NR. : 0123456789ABCDEF
Firmware : 21.316.01.04.274
Compile date / time : Mar 17 2017 09:29:51
Hardware ver. : CL1E8372HM
Dashboard version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
your Device is Unlock now But need to Repair Imei
now copy “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0” and past into Dc unlock log window.
Replace All X with your imei number, command will be like this at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0 Volcano Box Inferno
now Press “Enter Button” from key board you will get reply like this,
at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0

at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0
OK Volcano Box Inferno
Click on “Detect Modem” From Dc unlocker again.
Selected Applications port COM58
Found modem : E8372
Model : Huawei E8372h
IMEI : 866676787655471
Serial NR. : 0123456789ABCDEF
Firmware : 21.316.01.04.274
Compile date / time : Mar 17 2017 09:29:51
Hardware ver. : CL1E8372HM
Dashboard version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

================================================== =================

.

Vivo Preloader File Download
Vivo V5s preloader bbk6750 66 m
Vivo V5 preloader bbk6750 66 m
Vivo Y66 preloader bbk6750 66 m
Enable Notifications OK No thanks