Volcano Box Inferno UniTool Tool V1.4.6 Download

Volcano Box Inferno UniTool Tool V1.4.6 Download

Volcano Box Latest UniTool latest version download V1.4.6 Download VolcanoBox UniTool 1.4.6 Update for Huawei Modems, Repair Serial, Imei, Wifi etc

What’s new ? Volcano Box Inferno UniTool

Added Auto detect Huawei Modem
Added Read Info for huawei modem
Added V4 Unlock for huawei modem
Added Serial Repair for huawei modem
Added Wifi Repair for huawei modem
Added IMEI Repair for huawei modem

Volcano Box Latest UniTool Download Latest Version Setup For Box And Dongle

For Volcano Box For Inferno Dongle
With Imei       Inferno Tool UniTool V1.4.6 With Imei      Inferno Tool UniTool V1.4.6
Without Imei  Inferno Tool UniTool V1.4.6 Without Imei Inferno Tool UniTool V1.4.6
For Mtk For SPD

Volcano Box Inferno UniTool

inferno unitool for volcano box inferno uni tool ver 1.0.4 download
inferno unitool volcano inferno unitool inferno unitool download inferno uni tool (beta) Volcano Box Latest UniTool download

World’s 1st Added Qmobile i6 Metal 2017 Phone Support

World’s 1st Added Qmobile i6 Metal 2017 Read Factory File
World’s 1st Added Qmobile i6 Metal 2017 Write Factory File
World’s 1st Added Qmobile i6 Metal 2017 Unlock FRP Lock
World’s 1st Added Qmobile i6 Metal 2017 Fully Support

What’s New in 1.4.6 Volcano Box Inferno UniTool

What’s new in VolcanoBox Inferno UniTool 1.4.6
Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
Fixed some VIVO phones not detecting by selecting Auto cpu.
How to Unlock Huawei Modems with Inferno ?
Open Inferno UniTool 1.4.6
Go to Huawei -> Modem
Connect Huawei Modem in usb
in Normal mode
Click on Read info.
make sure you have installed Correct Drivers
Check software ver inside your modem.
go to back and select Erase and then select carefully your Modem model & Firmware ver
Firmware ver you checked from Read Info.
Check List Below which Modem & Ver Required Erase
Connect Test Point
Check List Below which Modem & Ver Required Testpoint
you can download all Test Points from here https://www.mediafire.com/folder/ysz…ems_Test_point
Make Sure in Device Manger have one Huawei port !!
Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
it will automatically reboot after successfully Erased
in device manager it will show 2 ports after successfully Erased.
Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
click on Next and let it patch flash.
After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
Some modems need to repair Imei by Inferno UniTool
Some modems need to Code calculate.
You must update your modem Firmware to LATEST Firmware to run super fine.
Make sure you Repair Wifi
Kindly have a look at list below for each modems model.
You have to Download HWModem.sys and Place into Inferno Unitool Folder
Complete Details of each ver & steps you have to do while unlock
Model: E5330s-B2
Supported Ver: 21.210.21.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5330s-B2
Supported Ver: 21.210.21.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5330s-B2
Supported Ver: 21.210.21.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5330s-B2
Supported Ver: 21.210.25.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5330s-B2
Supported Ver: 21.210.25.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5330s-B2
Supported Ver: 21.210.25.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.13.xx.274
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.13.xx.1065
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.13.xx.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.17.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.17.xx.1065
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E8231-S1
Supported Ver: 22.618.17.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: No Need
Note: Make Patch Flash Twice
Note2: After Patch Flash User Have To Calculate “Huawei Modem V3” Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.

Model: E5573cs-609
Supported Ver: 21.318.xx.xx.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.

Model: E5573cs-609
Supported Ver: 21.323.00.00.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.

Model: E8372H-608
Supported Ver: 21.316.01.01.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.

Model: E8372H-608
Supported Ver: 21.316.01.02.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.

Model: E8372H-608
Supported Ver: 21.316.01.03.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & then Update Firmware to which has in Modem before Erase.

Model: E8372H-608
Supported Ver: 21.316.01.04.274
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”

Model: E5573cs-322
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”

Model: E5573cs-322
Supported Ver: 21.323.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”

Model: E8372h-153
Supported Ver: 21.313.xx.xx.306
Test Point: YES
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.

Model: E8372h-153
Supported Ver: 21.318.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”

Model: E8372h-153
Supported Ver: 21.321.xx.xx.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: No Need
Imei Repair Command: “at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0”
Note: After Patch Flash, User have to Enter “Repar Imei Command” from “Dc Unlocker” & open Home Page of Modem and write New “Wifi Name”

Model: E5573s-320
Supported Ver: 21.315.01.00.306
Test Point: No
Erase: No
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.

Model: E5573s-320
Supported Ver: 21.315.01.01.306
Test Point: Yes
Erase: Yes
Patch Flash: Yes
Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
Imei Repair Command: No Need
Note: After Patch Flash, User have to Enter “Unlock Command” from “Dc Unlocker” & Update Firmware to which has in modem.

  • Added Oppo F3 Support
  • Added OPPO F3 Read Information
  • Added OPPO F3 Read Extended Information
  • Added OPPO F3 Read Factory File
  • Added OPPO F3 Write Factory File
  • Added OPPO F3 REST FRP
  • Added OPPO F3 Wipe User Data & Cache
  • Added OPPO F3 Repair User Data & Cache
  • Added OPPO F3 Repair IMEI
  • Added OPPO F3 Format FFS
  • Added Samsung Phones Reboot to Download Mode
  • Added Samsung Phones EFS read – Root Needed
  • Added Samsung Phones EFS write – Root Needed
  • Improved Write Full Flash Method Which Make Applicability More
  • Extensive Volcano Box Latest UniTool
  • Fixed Write Some Type of Factory File Fail
  • Fix From Write Flash Running Form Return to Previous From Error Bug
  • Fix Repair Userdata Failed While “Repair Userdata/Cache” with MTK 6750
  • Fix Repair Userdata Failed While “Repair Userdata/Cache” with MTK 6755
  • Fix Repair Userdata Failed While “Repair Userdata/Cache” with MTK 6797
  • Added Support of Wipe Data & cache for MTK 6750
  • Added Support of Wipe Data & cache for MTK 6755
  • Added Support of Wipe Data & cache for MTK 6797

Volcano Box Latest UniTool  MTK 6570 Cpu Test Report For Inferno Unitool

>>Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
>>
>>MediaTek USB Port (COM4)
>>
>>Connecting…
>>CPU TYPE:MT6570
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x05000000
>>BromVersion :0x05
>>BLVersion :0xFE
>>Boot downloading complete!
>>EMMC_ID:0x40491232320XXXXXXXXXXXXXXXXXX1120
>>EMMC_PRODUCT_NAME: 0x31409XXXX
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>
>>INT RAM: 64KB SDRAM EXT RAM: 512MB DRAM
>>Analysis of USB port…
>>Find partition success.

>>BasicInfo :
>>Brand : Qmobile
>>ProdName : Qmobile_PK
>>ProdModel : x29
>>Device : X29
>>AndroidVer: 6.0
>>MTK CPU : MT6570
>>MTK PRJ :
>>Display ID:
>>Board ID :
>>Build Date: Thu JAN 04 18:26:50 CST 2017
>>IMEI_1 : 35163309******
>>IMEI_2 : 35163309******
>>Read phone info OK.

UniTool Tool V1.4.6 Download For Update

Test Report 

Best Team ,,,Best Update
>Current Task: HUAWEI>>Read Modem Info
>>
>>Current Port:
FC – PC UI Interface (COM129)
>>
>>Modem Info:
>> Modem : E8372
>> Manufacturer : huawei
>> Firmware Ver. : 21.316.01.04.274
>> IMEI : 8662800########
>> SN. : 0123456789ABCDEF
>> IsoVer. : WEBUI_17.100.15.10.274_RE5
>> WebUiVer. : WEBUI_17.100.15.10.274_RE5
>> Sim Card Status : Unlocked
>> Wrong Codes Counter : 0 (left : 10)
>>
>>Modem Info Saved Path:
G:\Inferno_Volcano\UniTool_Vol\ModemInfo\huawei_E8 372_2017-09-09 19_06_21

>>Elapsed time: 00:00:38.

Volcano Box Latest UniTool Fev Secure Devices We have Test Report

>>Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
>>
>>MediaTek USB Port (COM4)
>>
>>Connecting…
>>CPU TYPE:MT6795
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x05000000
>>BromVersion :0x05
>>BLVersion :0xFE
>>Boot downloading complete!
>>EMMC_ID:0x11010030333247373400E93132211399
>>EMMC_PRODUCT_NAME: 0x303332473734
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x747C00000(29.12 G)
>>
>>INT RAM: 128KB SDRAM EXT RAM: 2GB DRAM
>>Analysis of USB port…
>>Find partition success.
>>  Volcano Box Inferno UniTool
>>Total partition entries found: 27
>>preloader:>>addr:0x000000 — length:0x040000
>>pgpt:>>addr:0x000000 — length:0x080000
>>proinfo:>>addr:0x080000 — length:0x300000
>>nvram:>>addr:0x380000 — length:0x500000
>>protect1:>>addr:0x880000 — length:0xA00000
>>protect2:>>addr:0x1280000 — length:0xA00000
>>seccfg:>>addr:0x1C80000 — length:0x040000
>>lk:>>addr:0x1CC0000 — length:0x060000
>>boot:>>addr:0x1D20000 — length:0x1000000
>>recovery:>>addr:0x2D20000 — length:0x1000000
>>secro:>>addr:0x3D20000 — length:0x600000
>>para:>>addr:0x4320000 — length:0x080000
>>logo:>>addr:0x43A0000 — length:0x1E00000
>>RESV:>>addr:0x61A0000 — length:0x080000
>>security:>>addr:0x6220000 — length:0x080000
>>bootconfig:>>addr:0x62A0000 — length:0x080000
>>letvconfig1:>>addr:0x6320000 — length:0x080000
>>letvconfig2:>>addr:0x63A0000 — length:0x080000
>>factory:>>addr:0x6420000 — length:0x080000
>>expdb:>>addr:0x64A0000 — length:0xA00000
>>tee1:>>addr:0x6EA0000 — length:0x500000
>>tee2:>>addr:0x73A0000 — length:0xC60000
>>system:>>addr:0x8000000 — length:0xA0000000
>>cache:>>addr:0xA8000000 — length:0x1A800000
>>userdata:>>addr:0xC2800000 — length:0x684380000
>>flashinfo:>>addr:0xFFFF0084 — length:0x1000000
>>sgpt:>>addr:0xFFFF0004 — length:0x080000
>> Volcano Box Inferno UniTool Download Latest Version
>>BasicInfo :
>>Brand : Letv
>>ProdName : Le1s_IN
>>ProdModel : Le X507
>>Device : X3_HK
>>AndroidVer: 6.0
>>MTK CPU : MT6795
>>MTK PRJ : alps-mp-m0.mp11-V1.14_letv6795.om.lv_P66
>>Display ID: DHXOSOP5801911241S release-keys
>>Board ID :
>>Build Date: Thu Nov 24 20:27:55 CST 2016
>>IMEI_1 : 8666*******
>>IMEI_2 : 8666*******
>>Read phone info OK.

>>Elapsed time: 00:00:34.