How To flash CPB file using YGDP Tool

How To flash CPB file using YGDP Tool STEP BY STEP

GUIDE FOR INSTALLATION AND USE OF YGDP ANDROID FLASH TOOL FOR CPB FIRMWARE FILE

How To flash CPB file using YGDP Tool

  1. First Of All Install the Latest Driver Get the upgrade driver files Download
  2. Power the phone off and connect it to the PC via the data cable of standard configuration the driver is not installed if it is the first time of upgrade;
  3. please install the driver manually, and specify the installation path to the position where the driver is located .
  4. After the upgrade driver is successfully installed, the device driver port can be seen in Device Manager
Related Post  How to use coolpad cds upgrade tool

Now Install The YGDP Tool

1- Flash tool setup must install first Download


cpb flash file tool
Now Click on Next > Next > Next to finish installation

2- Flash tool shortcut will available on Desktop


cpb flash file tool

3- Once click on above icon may be this Below error will appear

4- Right click on icon and go to properties


5- Go to compatibility > Enable below shown “ Run this program in compatibility mode for :”

6- Select system OS , Ex: window 7 > click on Apply > OK

7- Now double click on Flash tool icon, below screen will appear, Enter Password: 369

Related Post  How to use coolpad cds upgrade tool

8- Open the upgrade platform (password: 9527) to finish the following configuration

9- Below screen will appear, wait till tool verify the files

10- Connection of Mobile Phone before Upgrade

11- Upgrade Successful

FOLLOW US ON FACEBOOK
TRY OUR ANDROID APP

After upgrade is finished, input *#*#9527#*#* to check the version.

Thanks and enjoy

2 thoughts on “How To flash CPB file using YGDP Tool”

Leave a Reply

Your email address will not be published. Required fields are marked *